Engraving tools

For a clear and high quality engraving on various materials with our engraving system, we offer different tools according to your application needs. For engravings in plastic materials our standard engraving needles 15 degrees are most suitable. For wider lines or remarkable type faces our 36, 60 and 90 degree needles provide excellent results as well as for additional applications, like bevelling the edges. Larger areas to be cleaned or engraving of larger fonts the use of the fishtail cutters are helpful. Working on anodized aluminum signs, plates or stainless steel specific needles are available.


Standard engraving needles 15 degree

Engraving needle 15 degrees

Our 15 degree engraving needles are available in the sizes of .2; .3; .4; .5; .7; 1.0 mm and most suitable for engraving in plastic materials, single as well as multi layer.


Engraving needles 36, 60 and 90 degrees

Engraving needle 36, 60, 90 degrees

Our 36, 60, 90 degree engraving needles are available in the sizes of .2; .3; .4; .5; .7; 1.0 mm and most suitable to bevel the edges or for engraving in plastic materials, single as well as multi layer. In addition the 60 degree needles are providing very good results for engravings in anodized aluminum material.


Double tooth cutters with face radius

Double tooth cutter (fishtail)

Our double tooth cutter are available in the sizes of .5; .6; .8; 1.0; 1.2; 1.4; 1.6; 2.0; 2.4; 3.0 mm and most suitable for engraving larger fonts in plastic materials, single as well as multi layer. In addition they can be used for engravings in aluminium and brass. With the use of the cutter, clearing out of lager areas are more efficient.


Double tooth cutters with face radius

Special engraving needle for aluminum

With the special geometry of the needle, engraving of aluminum is most efficient. The needle has a 90 degree angle and creates a .4 to .7 mm engraving depth, much deeper compared to others without creating a burr next to the contour.


Special engraving needles 35 degree

Engraving needle 35 degrees for stainless steel

Our 35 degree engraving needles are available in the sizes of .2 and .4 mm and most suitable for engravings in metal surfaces like stainless steel.